Author(s)

David J. Smith

Affiliation(s)

School of Architecture, University of Southern California, Watt Hall 316, Los Angeles, CA.

Corresponding Author

David J. Smith

ABSTRACT

This paper introduces the phenomenon and basic characteristics of shear lag in civil engineering structures, and summarizes the research on shear lag problems of bridge structures and house structures at home and abroad. method, the applicability of various theories and methods and the research results on shear lag in civil engineering structures so far are reviewed, providing a basis for further research in the future. The research provides a basis and provides an outlook on the research prospects of shear lag.

KEYWORDS

Thin-walled box beam; Shear lag; Variation method; Finite element method; Cylinder structure

CITE THIS PAPER

David J. Smith. Review of research on shear lag in civil engineering structures. Academic Journal of Architecture and Civil Engineering. 2023, 1(2): 15-20. DOI: 10.61784/ajace231204.

REFERENCES

[1] Shen Pusheng. Interpretation of structural problems of high-rise buildings. Beijing: China Construction Industry Press, 2003.

[2] Bao Shihua. Newly compiled high-rise building structures. Beijing: China Water Conservancy and Hydropower Press, 2001.

[3] GOLDBERG J E, LEVE H L. Theory of prismatic folded plate structures. International Associations for Bridge And Structural. Engineering, Publications, 1957, 17: 59- 86.

[4] VANDALEN K, NARASIMHAMSV. Shear lag in shallow wide- flanged box girders. Struct DivASCE, 1976, 102(10): 1969- 1979.

[5] Zhang Shiduo, Deng Xiaohua, Wang Wenzhou. Shear lag effect of box-shaped thin-walled beams. Beijing: People's Communications Press, 1998.

[6] REISSNER E. On the problem of stress distribution in wide flanged box beam. J Aero Sci, 1938, 5(8): 295- 299.

[7] COULLA, AHMED AA. Deflections of frame- tube structures. J. Struct. Div. ASCE, 1978, 104(5): 857- 862

[8] REISSNER E. Analysis of shear lag in box beam by principle of minimum entialenergy. Quarterly of Applied Mathematics, 1946, 5(3): 268- 278.

[9] EVANS H, TAHERIAN A. Theprediction oftheshear lageffectin box girders. Proceedings of the Institution of Civil Engineers, 1977, 63(1): 69- 92.

[10] Tang Huaiping, Tang Dapei. Analysis of shear lag effect of long-span continuous rigid frame box girder. Journal of Southwest Jiaotong University 2001, 36 (6): 617-619.

[11] CHANG S T, YUN D. Shear lag effect in box girder with varying depth. J Struct Engr, ASCE, 1988, 114(10): 2280- 2292.

[12] CLOUGH R W. The finite element in plane stress analysis//Proc. 2nd ASCE Conf. on Electronic Computation. 1960.

[13] KWAN A K H. Shear lag in shear/core walls. J Struct Engrg, ASCE, 1996, 122(9): 097-1104.

[14] Chen Yachun, Liu Jun, Wei Yang, wait. Research on structural scheme selection and optimization of super high-rise buildings in an 8- degree area. building structure, 2011, 41 (S2): 16-21.

[15] Liu Deng. Research on temperature effects and shear lag during the construction stage of the main beam of a hybrid beam cable-stayed bridge. Foshan: Foshan University of Science and Technology, 2018.

[16] Luo Banner. Calculation program of finite strip method for curved box girder. Journal of Foshan University of Science and Technology (Social Science Edition), 1993 (4): 33-41.

[17] Cheng Xiangyun, Li Lifeng. Three combined analysis method of shear lag effect of variable height box girder bridge. highway, 2008 (1): 104-108.

[18] Luo Banner. Beam segment finite element method for shear lag calculation of thin-walled box beams. Journal of Hunan University, 1991, 18 (2): 33-39.

[19] WANG Q F, LI W Y. Spline finite member element method for buckling of thin-walled members with any cross sections in pure bending. J Computer Methods in Applied Mechanics and Egineering, 1996(136): 259-271.

[20] WANG Q F, LI W Y. Lateral buckling of thin-walled members with shear lag using spline finite member element method. Computers and Structures, 2000(75): 81-91.

[21] Zhu Mingqiao, Liu Xijun, Hu Xiulan, et al. Experiment and analysis of flexural performance of reinforced steel-brazed high-strength concrete thin-walled box beams. Journal of Xiangtan Mining Institute, 2002, 17 (4): 64-66.

[22] Zheng Haocheng, Liu Fan. Experimental study on shear lag of reinforced concrete box columns under low-cycle repeated loading. Journal of Suzhou University of Science and Technology (Engineering Technology Edition), 2019, 32 (1): 44-48.

[23] Luo Banner. Theoretical and experimental research on shear lag of thin-walled box beams based on energy principle. Changsha: Hunan University, 2005.

[24] Chen Yuji, Luo Banner, Liu Guangdong. Considering the elastic-plastic shear lag effect of thin-walled curved box beams. engineering mechanics, 2008 (4): 21-25.

[25] Pan Danguang, Cheng Ye, Chen Fan, wait. Shear lag effect of cantilever box beams under nonlinear temperature gradient. Journal of Hefei University of Technology (Natural Science Edition), 2018, 41 (3): 384-389.

[26] Huang Xianguo. Analysis of shear lag effect of long-span concrete box girder bridge under temperature load. Journal of Huizhou University, 2007 (3): 102-107.

[27] RWZA M. State of the art of the effective flange width for composite T-beams. Construction and Building Materials, DOI: 10.1016/j.conbuildmat.2020.118303.

[28] Wei Chenglong, Zeng Qingyuan, Liu Xiaoyan. Finite segment method for analysis of shear lag effect of slab-truss combined beams. bridge construction, 2000 (3): 11-13.

[29] Zhou Xuhui, Luo Banner, Zhang Qi. Finite segment method for shear lag dynamic characteristics of thin-walled box beams. Journal of Foshan University of Science and Technology (Natural Science Edition), 2017, 35 (1): 70-75.

[30] Li Guifeng. Analysis and research on spatial mechanical performance of flat and ultra-wide continuous box girder bridge. Journal of Shijiazhuang Railway University (Natural Science Edition), 2016, 29 (4): 16- 20.

[31] Zhu Shifeng, Shu Zhiyun, Li Chengjun. Analysis of influencing factors of shear lag effect of PC composite box girder with corrugated steel web. Road construction, 2014, 39 (3): 267-270.

[32] Xia Wenqiang. Effects of different load forms on box girder shear lag. Journal of Nanyang Institute of Technology, 2013, 5 (6): 89-9 1.

[33] COULL A, BOSE B. Simplified Analysis of Frame-Tube Structures. Structural Div. ASCE, 1975, 110: 2223-2240.

[34] Liu Kaiguo. Moment transfer method for high-rise frame-tube structures with variable cross-section. mechanics and practice, 2004, 26: 34-37.

[35] LEE Kang-kun, LOO Yew-chaye, GUAN Hong. Simple Analysis of Framed-Tube Structures with Multiple Internal Tubes. Journal of Structural Engineering, ASCE, 2001, 127(4): 450-460.

[36] Wang Mengfu, Chen Bing. Analysis of shear lag effect of reinforced concrete core tube with mixed concealed supports. Mechanics Quarterly, 2015, 3 6 (3): 493-501.

[37] Chen Bing. Research on the mechanical properties of reinforced concrete double-chamber cylinder with mixed concealed supports. Changsha: Hunan University, 2015.

[38] Xu Jianye. Comparative study of different analysis methods for high-rise frame core tube structures. Lanzhou: Lanzhou Jiaotong University, 2017.

[39] Yao Shudian. Analysis of shear lag effect and seismic performance of reinforced concrete tube-in-tube structure. Taiyuan: Taiyuan University of Technology, 2015.

[40] Li Jiabao, Li Cunquan, Cai Songbai. Shear lag of high-rise frame-tube structures. Journal of Hunan University, 1991 (2): 1-4.

[41] Feng Bo. Fine integration method for bending and torsion analysis of beam tube structures. Handan: Hebei University of Engineering, 2013.

[42] Gao Yan. Research on shear hysteresis effect of cylinder structure and its simplified analysis. Chongqing: Chongqing University, 200 6.

[43] Zhao Feng. Research on the basic mechanical properties of high-rise diagonal mesh structural system. Beijing: Tsinghua University, 2012.

[44] Ma Xinli. Spline function method for analysis of shear lag effect of frame-tube structures. Nanning: Guangxi University, 2005.

[45] Wang Haibo, Chen Bowang, Shen Pusheng. Simplified analysis of frame-tube structure considering negative shear lag effect. Journal of Computational Mechanics, 2006, 2 3 (6): 706-710.